QUESTION NO: 101
When designing a WLAN, AP placement is important. How would you rank the density of APs needed to support location services versus data and voice services?
A. Voice and data services both require a higher density of APs than location services.
B. Data services have a lower density of APs compared to location services, but more than voice.
C. Voice services have the highest density of APs over location and data services.
D. Data services have the lowest density of APs compared to location services, which has the highest density.
Answer: D
QUESTION NO: 102
When performing a post-installation audit using the Ekahau Survey tool, which four steps are associated with the passive portion of the audit? (Choose four.)
A. Check that all channels are supported by the APs regardless of client capabilities.
B. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.
C. Verify that the real-world network traffic (for example, physical data rate, packet loss, etc.) meets user requirements.
D. When you have completed the post-installation surveys, compare them to the surveys that were performed before the installation. They should look nearly identical.
E. Check to see if the signal levels on other access points that are heard on the same channel are at least 19 dBm weaker than the access point that you are next to.
F. Survey by SSID to ensure that smooth roaming is taking place.
Answer: A,B,D,E