QUESTION 171
A corporate environment will include Exchange Server 2010.
You are planning capacity for the Mailbox servers. You require 800 GB of disk space for mailbox content.
You need to recommend the minimum amount of additional space required for content indexing.
What should you recommend?
A. 160 GB
B. 96 GB
C. 120 GB
D. 80 GB
Answer: D
QUESTION 172
You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. The organization contains the servers configured as shown in the following table.
You plan to deploy a line-of-business application named App1. App1 will have a built-in SMTP
service that will send e-mail messages to users in the Exchange organization.
You need to recommend a message routing solution that meets the following requirements:
- Ensures that App1 can send e-mail messages to internal users.
- Prevents other servers on the internal network from sending e-mail messages to internal users.
- Ensures that each e-mail message received by the Exchange organization is scanned for viruses.
You install Microsoft Forefront Protection 2010 for Exchange Server on both Edge Transport servers.
Which of the following solutions is the best recommendation? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. On Edge1, create a new internal Receive connector.
From the properties of the new Receive connector, configure the Remote Network settings to include the IP address of App1, and then add the Anonymous users permission group to the Receive connector.
From the properties of the default internal Receive connector on Edge1, exclude the IP addresses of the internal network.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
B. On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, create a new internal Receive connector, and then configure the Remote Network settings to include the IP address of App1.
On the server that hosts App1, configure the SMTP service to relay e-mail directly to Hub1.
C. From the properties of the default Receive connector on Edge1, configure the Remote Network settings
to include the IP address of App1, and then add the Anonymous users permission group to the Receive connector.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
D. On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, add the Anonymous users permission group to the default Receive connector.
On an internal DNS server, create a Mail Exchanger (MX) record that points to Hub1.
On the server that hosts App1, configure the SMTP service to relay e-mail by using DNS name resolution.
Answer: A
QUESTION 173
A company has an on-premise Exchange Server 2010 SP1 environment. Client computers are joined to an Active Directory Domain Services (AD DS) domain. Some users are hosted in a
cloud-based Exchange Server 2010 SP1 environment. An organization relationship exists between the on-premise and cloud-based environments.
Administrative assistants with mailboxes in the on-premise environment must be able to view contacts in cloud-based user mailboxes.
You need to recommend a solution that meets the requirement.
What should you recommend?
A. a federation trust
B. a sharing policy
C. a remote domain
D. an Outlook protection rule
Answer: B
QUESTION 174
An organization plans to deploy Exchange Server 2010 in multiple Active Directory Domain Services (AD DS) sites. The locations of the Client Access servers are as shown in the following table.
Users will access Autodiscover, Outlook Web App (OWA), Exchange ActiveSync, and Outlook Anywhere only over the Internet through the URL mail.contoso.com.
Users must be able to connect to all of the services via an SSL connection without receiving errors or warning messages.
You need to recommend an SSL certificate configuration. In addition, you need to minimize the number of certificates purchased.
Which two actions should you recommend? (Each correct answer presents part of the solution. Choose two.)
A. Use the existing self-signed certificate on CAS02.
B. Use the existing self-signed certificate on CAS01.
C. Purchase a third-party SSL certificate for CAS01 containing the autodiscover.contoso.com and mail.contoso.com FQDNs.
D. Purchase a third-party SSL certificate for CAS02 containing the autodiscover.contoso.com and mail.contoso.com FQDNs.
Answer: AC
QUESTION 175
Contoso, Ltd. has an Exchange Server 2010 environment. Fabrikam, Inc. has an Exchange Server 2007 environment.
Contoso acquires Fabrikam. Contoso plans to migrate the email accounts of the Fabrikam employees to the existing Contoso Exchange Server environment. Fabrikam employees will have new Contoso email addresses and will also maintain their existing Fabrikam email addresses for a period of time.
You need to recommend a solution for ensuring that replies to email messages sent by Fabrikam employees prior to the migration are directed to the migrated mailboxes.
What should you recommend?
A. In the Exchange Management Console (EMC) in the Contoso Exchange Server environment, set the primary email address to the Fabrikam email address.
B. After the mailbox migration, run the Update-EmailAddressPolicy cmdlet for each email address policy.
C. Export the legacyExchangeDN attributes from the Fabrikam mailboxes and add them as custom X500
addresses on the new Contoso mailboxes.
D. In the Exchange Management Console (EMC) in the Contoso Exchange Server environment, add the
Fabrikam domain name to the Accepted Domains list as an authoritative domain.
Answer: C
QUESTION 176
A corporate environment includes Exchange Server 2003 SP2. Client computers run Microsoft Office Outlook 2003.
You deploy Exchange Server 2010 in the existing Exchange organization, and then install Exchange Server 2010 SP1 on all the Exchange Server 2010 servers. The company intends to move mailboxes from Exchange Server 2003 SP2 to Exchange Server 2010 SP1.
You need to recommend a solution for ensuring that after their mailboxes are moved, users can open their mailboxes by using Outlook 2003.
What should you recommend?
A. Obtain and install an SSL certificate for each Exchange Server 2010 SP1 Client Access server.
B. Configure Outlook 2003 to encrypt data between Outlook and the Exchange server.
C. Obtain and install an SSL certificate for each Exchange Server 2010 SP1 Mailbox server.
D. Configure Outlook 2003 to use NTLM authentication.
Answer: B
QUESTION 177
A corporate environment will include client computers that run Microsoft Outlook 2010. Email services will be provided to some users by a cloud-based Exchange Server 2010 SP1 service provider and to other users by an on-premise deployment of Exchange Server 2010 SP1.
You need to recommend a solution that will allow users in the cloud-based environment to receive internal Out of Office replies from users in the on-premise environment.
What should you recommend?
A. Create an accepted domain.
B. Create a transport rule.
C. Create a remote domain.
D. Create an organization relationship.
Answer: C
QUESTION 178
A corporate environment includes Exchange Server 2010. The Exchange Server environment includes two Hub Transport servers, two Client Access servers, and two Mailbox servers on the internal network and two stand-alone Edge Transport servers in the perimeter network. The Mailbox servers are in a database availability group (DAG).
You are designing a solution to allow a third-party application to send email messages to both internal users and external users.
You have the following requirements:
- Ensure that the third-party application can use domain-based NTLM authentication method for outgoing messages.
- Ensure that if only one server has a hardware failure, all outgoing messages are accepted for delivery.
- Minimize the cost of the solution.
You need to recommend a solution that meets the requirements.
What should you recommend?
A. Configure DNS round-robin rotation for SMTP connections to the Mailbox servers
B. Deploy a hardware load balancer for SMTP connections to the Edge Transport servers
C. Configure DNS round-robin rotation for SMTP connections to the Edge Transport servers
D. Deploy a hardware load balancer for SMTP connections to the Hub Transport servers
Answer: D
QUESTION 179
You are designing an Exchange Server 2010 environment. The environment will include three datacenters, located in Seattle, Dallas, and Miami.
Each datacenter will have a separate Active Directory Domain Services (AD DS) site. The Seattle and Miami datacenters will each contain two Mailbox servers. The Dallas datacenter will not contain Mailbox servers. All Mailbox servers will be members of a single database availability group (DAG).
You need to recommend the minimum file share witness configuration necessary to ensure that if the Seattle datacenter fails, the DAG will continue to function.
What should you recommend?
A. No file share witnesses are necessary.
B. Place one file share witness in the Seattle datacenter.
C. Place one file share witness in the Seattle datacenter and one alternate file share witness in the Miami datacenter.
D. Place one file share witness in the Dallas datacenter.
Answer: D
QUESTION 180
A corporate environment includes Exchange Server 2010. The Exchange Server environment includes two Edge Transport servers and two Hub Transport servers. The Edge Transport servers process Safe Sender List information from Exchange users and have multiple IP Allow list entries. An edge subscription is in place between the Edge Transport servers and the Hub Transport servers.
You need to recommend a solution for configuring a replacement Edge Transport server.
You have the following requirements:
- Recover all the send connector, receive connector, and accepted domains settings.
- Recover all the IP Allow list entries.
- Continue to process Safe Sender List information.
What should you recommend?
A. Configure a new Edge Transport server, restore from a Windows system state backup, and then use
cloned configuration scripts.
B. Configure a new Edge Transport server, create and import a new edge subscription, and then use
cloned configuration scripts.
C. Configure a new Edge Transport server, create and import a new edge subscription, and then restore
from a Windows system state backup.
D. Restore from a Windows system state backup, configure a new Edge Transport server, and then use
cloned configuration scripts.
Answer: B
Free Download Pass4sure Microsoft 70-663 Exam Question with PDF & VCE
