QUESTION NO: 21
Which two pieces of information from the Cisco WLC v7.0 GUI does Monitor > Clients provide about a VoWLAN client? (Choose two.)
A. RSSI at current AP
B. WMM state
C. current MOS
D. current RF channel
E. current data rate
Answer: A,B
QUESTION NO: 22
What are two benefits that result from Cisco WLC configuration of DCA for 5-GHz VoWLAN deployments? (Choose two.)
A. Avoid channels that are affected by a microwave oven
B. Manually remove channels that are not supported by VoWLAN clients
C. Avoid 802.11n 40-MHz channels
D. Avoid nearby radar
E. Adjust RRM power thresholds
Answer: B,D
QUESTION NO: 23
What is the best practice for configuring data rates for an 802.11a VoWLAN deployment?
A. Configure mandatory data rates of 9 and 54 Mb/s. Disable data rates below 6 Mb/s and all other data rates as supported.
B. Configure a mandatory data rate of 6 Mb/s. Disable data rates below 6 Mb/s and configure all other data rates as supported.
C. Configure a mandatory data rate of 54 Mb/s. Disable data rates below 36 Mb/s and configure all other data rates as supported.
D. Configure a mandatory data rate of 12 Mb/s. Disable data rates below 12 Mb/s and all other data rates as supported.
Answer: D
QUESTION NO: 24
What is the best practice for configuring data rates for an 802.11b VoWLAN deployment?
A. Configure mandatory data rates of 11 and 54 Mb/s. Disable data rates below 6 Mb/s and all other data rates as supported.
B. Configure a mandatory data rate of 6 Mb/s. Disable data rates below 6 Mb/s and configure all other data rates as supported.
C. Configure a mandatory data rate of 11 Mb/s. Disable data rates below 11 Mb/s and all other data rates as supported.
D. Configure a mandatory data rate of 12 Mb/s. Disable data rates below 12 Mb/s and all other data rates as supported.
Answer: C
QUESTION NO: 25
What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP phones on a VoWLAN?
A. Configure SIP with static CAC only with SIP call snooping.
B. Configure SIP with static CAC only without SIP call snooping.
C. Configure SIP with load-based CAC only with SIP call snooping.
D. Configure SIP with load-based CAC only without SIP call snooping.
E. Configure SIP with load-based CAC and TSPEC only with SIP call snooping.
Answer: A